Development of interlocking block bricks from clayey soil, mixed with bagasse ash and fly ash Development of interlocking block bricks from clayey soil, mixed with bagasse ash and fly ash
Main Article Content
Abstract
This researcher aim to use fly ash and bagasse ash in the production of interlocking blocks made of clayey soil in Surin Province. The cement to soil ratio was controlled at 1:6 and the replacement level of fly ash and bagasse ash were 30 and 40 percent by weight. The amount of water was varied to evaluate the optimum moisture content (OMC) to used in the mixture of interlocking block. Samples were cast and cured in moist condition until the testing age. From the study, the optimum proportions of cement: local soil: fly ash was 0.7:6.0:0.3 which gave the 90-day compressive strength of 110 kg/cm2, water absorption was 10.4%. The drying shrinkage was 0.390 % and abrasion resistance was 2.17%. As the results, fly ash is able to partially replace in inter locking block made from local clayey soil.
Article Details
สงวนสิทธิ์ โดย สถาบันการอาชีวศึกษาภาคตะวันออกเฉียงเหนือ 1
306 หมู่ 5 ถนนมิตรภาพ หนองคาย-อุดรธานี ตำบลโพธิ์ชัย อำเภอเมืองหนองคาย จังหวัดหนองคาย 43000
โทร 0-4241-1445,0-4241-1447
ISSN : 3027-6861 (print) ISSN : 3027-687X (online)
References
วุฒินัย กกกําแหง และพิชิต เจนบรรจง, “เอกสารประกอบการอบรมการผลิตบล็อกประสาน วว. การผลิตบล็อกประสานให้ได้คุณภาพ”, ฝ่ายนวัตกรรมวัสดุ สถาบันวิจัยวิทยาศาสตร์และเทคโนโลยีแห่งประเทศไทย (วว.), กรุงเทพฯ, 2551.
ปริญญา จินดาประเสริฐ และชัย จาตุรพิทักษ์กุล, “ปูนซีเมนต์ปอซโซลานและคอนกรีต”, สมาคมคอนกรีตแห่งประเทศไทย, พ.ศ.2551, หน้า 317.
Chindaprasirt, P., Jaturapitakkul, C., Sinsiri, T. “Effect of fly ash fineness on microstructure of blended cemented paste”. Construction and Building Materials,Vol.21, No.7, 2007, pp. 1534-1541.
ชัย จตุรพิทักษ์กุล, “การใช้เถ้าชานอ้อยบดละเอียดเพื่อปรับปรุงกำลังอัด การซึมผ่านน้ำ และความต้านทานคลอไรด์ของ คอนกรีตที่ใช้มวลรวมหยาบจากการย่อยเศษคอนกรีตเก่า”, วารสารวิจัยและพัฒนา มจธ, พ.ศ. 2554.
American Society for Testing and Materials, “ASTM D4318 Standard test methods for liquid limit. Plastic Limit and Plasticity Index of Soils”, Annual Book of ASTM Standards, 2010.
Industrial product standards, “Portland cement - Volume 1 – Requirements for quality criteria TIS.15 Vol. 1-2555”, Office of Thai Industrial Standards, Ministry of Industry, 2012.
มาตรฐานผลิตภัณฑ์สํานักงาน, “มาตรฐานผลิตภัณฑ์อุตสาหกรรม มอก.57-2533 คอนกรีตบล็อกรับน้ำหนัก. กรุงเทพฯ : สํานักงานมาตรฐานผลิตภัณฑ์อุตสาหกรรม กระทรวงอุตสาหกรรม”, พ.ศ.2533.
มาตรฐานผลิตภัณฑ์สํานักงาน, “มาตรฐานผลิตภัณฑ์อุตสาหกรรม มอก.58-2533 คอนกรีตบล็อกไม่รับน้ำหนัก. กรุงเทพฯ : สํานักงานมาตรฐานผลิตภัณฑ์อุตสาหกรรม กระทรวงอุตสาหกรรม”, พ.ศ.2533.
สํานักงานมาตรฐานผลิตภัณฑ์อุตสาหกรรม, “มาตรฐานผลิตภัณฑ์อุตสาหกรรมคอนกรีตบล็อกประสานอิฐก่อสร้างสามัญ 77-545”, กรุงเทพฯ, พ.ศ.2551.
สํานักงานมาตรฐานผลิตภัณฑ์อุตสาหกรรม, “มาตรฐานผลิตภัณฑ์ชุมชนอิฐบล็อกประสาน, มผช. 602-2547”, พ.ศ.2547.
ชัย จาตุรพิทักษ์กุล,“เถ้าชีวมวลจากโรงงาน อุตสาหกรรม: ปัญหาข้อจํากัด และการนําไปใช้งาน”, พ.ศ.2555.
สํานักงานมาตรฐานผลิตภัณฑ์อุตสาหกรรม, “มาตรฐานผลิตภัณฑ์อุตสาหกรรมคอนกรีตมวลเบาแบบมีฟองอากาศ-อบไอน้ำ (มอก.1505-2541)”, พ.ศ.2541.