Development Leaves Chipper Creating Machine.

Abstract

This project aims to create a sub-branches and leaves to reduce the burning of agricultural waste materials. Maximize the benefits for animal such as a fertilizer or even a tree. The event is designed to create a sub-branches, leaves with distinctive four characteristics: 1. Knife set knife chipper style dish with 3 blades 2. Sets of blades, the blade to blade rotation and the blade in place. Three. Mesh size 12 mm hole size 4. Machine is safe to operate. Then, the experts found that the number 10 has been designed. The average standard deviation in the range of 4.16 to 0.49, the average level of 4.13 to 0.31 and the standard deviation is. The average standard deviation 4.40 0.47 4.16 average at the 0.42 level, the standard deviation indicates that the sub-branches and leaves to create application. We have tested the performance of the machine by the branches and leaves. Separate branches, twigs and leaves, fresh and dried leaves, twigs, leaves the volumetric fraction of the performance of each sub-test 5 times for 10 minutes each time the sub-branches, leaves at any given time. Then the container is used to measure the volume of debris, leaves and branches were recorded. Results show that a leaf chipper. Chippers can live 0.501 cubic meter / hour dry 0.438 cubic meter branches / hour. Fresh leaves 0.307 cubic meter / hour cubic meter leaves dry 0.317 / hour. And the average of the sub-branches. Leaves could be the amount of 0.391 cubic meters / hour to conclude that the sub-branches, leaves a good performance in accordance with the criteria. And can be used in the future.